- Overview
- Product Description
- Detailed Photos
- Product Parameters
- Packaging & Shipping
- Company Profile
- Certifications
- FAQ
Basic Info.
Packaging & Delivery
10 days (2 - 50 Pieces)
15 days (51 - 100 Pieces)
To be negotiated ( > 100 Pieces)
Product Description
The working principle of mechanical isolation pumps may vary depending on the specific type, but usually involves some form of isolation mechanism to prevent direct contact between the pump body and the conveyed medium
After the motor is started, the connecting rod vibrates through the power transmission of the reducer, and the connecting rod simultaneously drives the diaphragm to perform forward and reverse reciprocating motion. During the reciprocating motion, the diaphragm sucks in and discharges liquid respectively, achieving the transportation of liquid
Mechanical isolation pumps, due to their unique isolation mechanism, have been widely used in many scenarios where corrosive, abrasive, or high viscosity media need to be transported
Diaphragm metering pumps use specially designed and processed flexible diaphragms instead of pistons to achieve reciprocating motion under the action of the driving mechanism, completing the suction discharge process. Due to the isolation effect of the diaphragm, the isolation between the measured fluid and the driving lubrication mechanism is truly achieved structurally. The high-tech structural design and selection of new materials have greatly improved the service life of diaphragms. Coupled with the excellent corrosion resistance of composite materials, diaphragm metering pumps have become the main pump type in fluid metering applications
Unit: (mm)
| Model Selection | |||||
| Model | Number of strokes (min-1) | Rated flow rate (L/h) | Maximum pressure (Bar) | Voltage (V) | |
| LB-0.47/7 | 7 | 0.47 | 7 | 220V 50Hz | |
| LB-1.10/7 | 13 | 1.10 | 7 | 220V 50Hz | |
| LB-2.36/7 | 25 | 2.36 | 7 | 220V 50Hz | |
| LB-3.78/7 | 51 | 3.78 | 7 | 220V 50Hz | |
| LB-4.72/7 | 51 | 4.72 | 7 | 220V 50Hz | |
| LB-10.72/4.2 | 70 | 10.72 | 4.2 | 220V 50Hz | |
| LB-15.77/4.2 | 70 | 15.77 | 4.2 | 220V 50Hz | |
Operating rules and precautions
Operating procedures:
1. Make sure that the power supply of the dosing pump is connected and the display screen is displayed normally.
2. Check whether the infusion pipeline of the dosing pump is connected correctly and make sure that there is no air leakage.
3. Turn on the power switch of the dosing pump and wait for the self-test of the dosing pump to be completed.
4. Prepare the medicine that needs to be added according to the requirements, and connect it to the liquid inlet of the dosing pump.
5. Set the speed and dosage of the dosing pump according to the actual needs.
6. After confirming that the parameters of the dosing pump are set correctly, press the "Start" button to start dosing.
Note:
1. The dosing pump needs to be calibrated regularly to ensure the accuracy and safety of infusion.
2. The infusion pipeline of the dosing pump needs to be replaced frequently to prevent bacterial contamination.
3. When the dosing pump has an alarm or abnormal situation, it is necessary to stop dosing in time and conduct investigation and treatment.
4. During the operation of the dosing pump, it is necessary to closely observe the relevant parameters and the operating status of the equipment.
5. When operating the dosing pump, it is necessary to comply with the use specifications of medical devices or industrial equipment to ensure safe use.
1. Products are packed by shrink film. It can reduce abrasion when transport..
2.Products are packed by high quality carton, suitable for long distance ocean freight transportation as well as changing climate and with good resistance to moisture and shocks.
Company Introduction
Changsha Lingbo Environmental Protection Technology Co., Ltd. is a high-tech enterprise focusing on water treatment accessories. Its main products include RO membranes, ultrafiltration membranes, filter cloths, filter bags, filter elements, water tanks, dosing pumps, metering pumps, and pharmaceuticals, which are widely used in new energy, microelectronics, petrochemicals, medical, pharmaceutical, food and beverage, water treatment, and automobile manufacturing. We are able to provide RO systems and various water treatment products for residential, commercial, and industrial components. We not only focus on the quality and performance of our products, but we continue to research and innovate to provide more efficient, energy-saving, and environmentally friendly products and solutions for global customers
Q: Are you trading company or manufacturer ?
A: We are factory, and our factory has the independent research and development capacity
Q1: What's your business range?
A: We manufacture PH/ORP/EC/DO/Chlorine/Turbidity meters and provide dosing pumps, diaphragm pumps, dosing systems, pressure instruments, flow meters, level meters, dosing systems, and so on.
Q: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer sample but it must be paid
Q: What is your terms of payment ?
A:TT, LC. etc.....